Refit 2017

Additionally, you may request a quote or provide feedback by contacting us via:


Phone: +1 941 756 0600
or This email address is being protected from spambots. You need JavaScript enabled to view it.

Monday - Friday

8:00 AM to 12:00 Noon
1:00 PM to 5:00 PM



Developed to be user-friendly, the simplified 1:1 mix ratio allows a batch of any size to be easily measured and mixed. Once thoroughly mixed, the material can be spread immediately, requiring no induction time. At 77° F, a layer of FFE-200 applied with a 3/16" toothed trowel will have an open time of approximately 60-70 minutes, the material will set in approximately 4-6 hours, and complete cure will be achieved in approximately 24 hours. TDS Fitting & Fairing Epoxy is DOT non-corrosive, so it does not require hazardous labeling for shipment. Read More


FFE200-2G (2 GALLON KIT - 7.56 LITER)

Approximately 30 ft² (2.8m²) / Gal.

Copyright ©2011-15 Teakdecking Systems, Inc. All rights reserved. Reproduction and distribution only after written approval.