Refit 2017


Additionally, you may request a quote or provide feedback by contacting us via:

 

Phone: +1 941 756 0600
or This email address is being protected from spambots. You need JavaScript enabled to view it.

Monday - Friday

8:00 AM to 12:00 Noon
1:00 PM to 5:00 PM

TDS FE-220T


LOW TEMPERATURE
CURE

Once cured, TDS FE-220T Fitting Epoxy serves as an additional corrosion barrier to the sub-surface, and specially-engineered fillers give the Fitting Epoxy outstanding internal strength and water-resistance. Developed to be user-friendly, the simplified 1:1 mix ratio allows a batch of any size to be easily measured and mixed. Once thoroughly mixed, the material can be spread immediately, requiring no induction time. At 77° F, a layer of FE-220T applied with a 3/16" toothed trowel will have an open time of approximately 70-80 minutes, the material will set in approximately 4-6 hours, and complete cure will be achieved in approximately 24 hours. TDS Fitting Epoxy is DOT non-corrosive, so it does not require hazardous labeling for shipment. Read More

PRODUCT #S:

FE220T-2G (2 GALLON KIT - 7.56 LITER)

COVERAGE:
Approximately 30 ft² (2.8m²) / Gal.

 

Copyright ©2011-15 Teakdecking Systems, Inc. All rights reserved. Reproduction and distribution only after written approval.