Epoxy FFE-200

FFE-200 Fairing & Bonding Epoxy          NEW COLOR!   Brown!

• Mixes easily in 1:1 ratio
• Medium viscosity for fitting and fairing
• Lightweight and easy to sand, in brown

FFE-200 Fairing & Bonding Epoxy is a custom blended flexible mastic of high quality epoxy resins and activators, and engineered fillers to yield a light weight, flexible and easily-sanded system used for both fairing of deck substrates and the final glue-down of deck panels. FFE-200 weighs only 8 lb (3.6 kg) per gallon container when cured and its cell-like structure makes it an excellent sound and thermal insulator. The viscosity of the FFE-200 is formulated to be high enough to stay in place when used for fairing, but low enough to provide excellent wet-out for bonding. The FFE-200 Fitting & Fairing Epoxy will cure in temperatures as low as 45° F (7°C).

Developed to be user-friendly, the simplified 1:1 mix ratio allows a batch of any size to be easily measured and mixed. Once thoroughly mixed, the material can be spread immediately, requiring no induction time. At 77°F (25°C), a layer of FFE-200 applied with a 3/16″ (4.8mm) toothed trowel will have an open time of approximately 60-70 minutes, the material will set in approximately 4-6 hours, and complete cure will be achieved in approximately 24 hours. This bonding epoxy has US Department of Transportation “non-corrosive” classification so it does not require hazardous labeling for shipment.

COVERAGE: Approximately 30 ft²/Gal (2.8m²/3.78L)

FOR MORE INFORMATION:

• Product Information & Surface Preparation Sheet
• Refurbishing Teak Decking Procedure Sheet
• SDS for FFE200 Fairing & Bonding Epoxy Activator
• SDS for FFE200 Fairing & Bonding Epoxy Base