DECK MAINTENANCE PRODUCTS

FE-180 MARINE EPOXY ADHESIVE

FE-180 Marine Epoxy Adhesive is a flexible epoxy, formulated to achieve maximum bond strength between teak and most common structural marine materials, such as wood, fiberglass, and properly primed aluminum, and steel. The specially engineered fillers allow the FE-180 to achieve an excellent strength bond to less than perfectly prepared substrates.

Once thoroughly mixed, the material can be spread immediately, requiring no induction time. At 77°F (25°C), a layer of FE-180 applied with a 3/16″ (4.8mm) toothed trowel will have an open time of approximately 120-130 minutes, the material will set in approximately 6-8 hours, and complete cure will be achieved in approximately 24-36 hours.

Once cured, FE-180 provides excellent water-resistance, flexibility and internal strength which ensures the long-term stability of the composite structure. FE-180 will cure in temperatures as low as 50ºF (10ºC). Developed to be user-friendly, the simplified 1:1 mix ratio allows a batch of any size to be easily measured and mixed. This bonding epoxy has US Department of Transportation “non-corrosive” classification, so it does not require hazardous labeling for shipment.

COVERAGE: Approximately 30 ft²/Gal (2.8m²/3.78L)

• Excellent Bond Strength
• Best for gluing teak and teak panels
• Flexible strength resists shock and twists
• High viscosity profile to fill gaps
• 1:1 mix ratio for easy mixing
• Non-blushing
• High density fillers
• Tinted brown to complement most wood species
• 1-gallon (3.8 L) and 2-gallon (7.6 L) kits
• 12-month shelf life
• Store in a dry area between 50-85ºF (10-30º)