DECK MAINTENANCE PRODUCTS

FFE-200 premium

marine EPOXY  

FFE-200 Premium Marine Epoxy is a  custom blended flexible mastic of high quality epoxy resins and activators, and engineered fillers to yield a light weight, flexible and easily-sanded system used for both fairing of deck substrates and the final glue-down of deck panels. FFE-200 weighs only 8 lb (3.6 kg) per gallon container when cured and its cell-like structure makes it an excellent sound and thermal insulator. The viscosity of the FFE-200 is formulated to be high enough to stay in place when used for fairing, but low enough to provide excellent wet-out for bonding. The FFE-200 will cure in temperatures as low as 45° F (7°C).

Developed to be user-friendly, the simplified 1:1 mix ratio allows a batch of any size to be easily measured and mixed. Once thoroughly mixed, the material can be spread immediately, requiring no induction time. At 77°F (25°C), a layer of FFE-200 applied with a 3/16″ (4.8mm) toothed trowel will have an open time of approximately 60-70 minutes, the material will set in approximately 4-6 hours, and complete cure will be achieved in approximately 24 hours. This bonding epoxy has US Department of Transportation “non-corrosive” classification so it does not require hazardous labeling for shipment.

COVERAGE: Approximately 30 ft²/Gal (2.8m²/3.78L)

• Maximum bond strength
• Excellent fairing material
• Superior wet-out of bonding surfaces
• Best for vacuum bagging
• Flexible strength resists shock and twist
• Light weight fillers for reduced weight and standability
• 1:1 mix ratio for easy mixing
• Non-blushing
• 1-quart (0.95 L), 1-gallon (3.8 L) and 2-gallon (7.6 L) kits
• 12-month shelf life
• Store in a dry area between 50-85ºF (10-30º)
  

FOR MORE INFORMATION

• Product Information & Surface Preparation Sheet
• Refurbishing Teak Decking Procedure Sheet
• SDS for FFE200 Premium Marine Epoxy Activator
• SDS sheets for FFE200 Premium Marine Epoxy Base
• Products Catalog

FE-180 MARINE EPOXY ADHESIVE

FE-180 Marine Epoxy Adhesive is a flexible epoxy, formulated to achieve maximum bond strength between teak and most common structural marine materials, such as wood, fiberglass, and properly primed aluminum, and steel. The specially engineered fillers allow the FE-180 to achieve an excellent strength bond to less than perfectly prepared substrates.

Once thoroughly mixed, the material can be spread immediately, requiring no induction time. At 77°F (25°C), a layer of FE-180 applied with a 3/16″ (4.8mm) toothed trowel will have an open time of approximately 120-130 minutes, the material will set in approximately 6-8 hours, and complete cure will be achieved in approximately 24-36 hours.

Once cured, FE-180 provides excellent water-resistance, flexibility and internal strength which ensures the long-term stability of the composite structure. FE-180 will cure in temperatures as low as 50ºF (10ºC). Developed to be user-friendly, the simplified 1:1 mix ratio allows a batch of any size to be easily measured and mixed. This bonding epoxy has US Department of Transportation “non-corrosive” classification, so it does not require hazardous labeling for shipment.

COVERAGE: Approximately 30 ft²/Gal (2.8m²/3.78L)

• Excellent Bond Strength
• Best for gluing teak and teak panels
• Flexible strength resists shock and twists
• High viscosity profile to fill gaps
• 1:1 mix ratio for easy mixing
• Non-blushing
• High density fillers
• Tinted brown to complement most wood species
• 1-gallon (3.8 L) and 2-gallon (7.6 L) kits
• 12-month shelf life
• Store in a dry area between 50-85ºF (10-30º)
  

FOR MORE INFORMATION

• Product Information & Surface Preparation Sheet
• Refurbishing Teak Decking Procedure Sheet
• SDS for FE-180A Marine Epoxy Base
• SDS sheets for FE-180A Marine Epoxy Activator
• Products Catalog
• 
  
  

AP-100 marine EPOXY

AP-100 Marine Epoxy is a general purpose, high strength adhesive for general marine gluing applications. It has excellent bond strength and wet-out of bonding surfaces, mixes in a 1:1 ratio, and is non-blushing.

• Easy-to-use all-purpose epoxy
• Ideal for installing plugs, or for laminates
• Translucent epoxy blends with surrounding surfaces
  

FOR MORE INFORMATION

• Product Information & Surface Preparation Sheet
• Refurbishing Teak Decking Procedure Sheet
• SDS for AP-100 Marine Epoxy Activator
• SDS Sheets for AP-100 Marine Epoxy Base
• Products Catalog

MPS-4000 Bedding & bonding adhesive



MPS-4000 is a single-component fast cure, elastomeric, water-resistant, moisture cure, STPU bonding adhesive for marine applications. Designed for bedding deck materials including teak, composite deck and deck hardware.

Suitable substrates include GRP, marine plywood, properly prepared steel, aluminum and stainless steel. It is designed to achieve high tensile and tear strengths, abrasion resistance and an average ultimate Shore A Hardness of at least 55, yet still withstand 25% total joint movement.

 COVERAGE: Approximately 10 ft2 /0.93m2 per 20 fl oz foil pack

• Single-component fast cure bonding adhesive
• For use on teak or composite decking and deck hardware
• Suitable substrates are GRP, marine plywood, properly prepared steel, aluminum, and stainless steel
• 1 quart (0.95 L) and 1 gallon (3.78 L)
• 12-month shelf life
• Store in a dry area between 50-85ºF (10-30º)
  

FOR MORE INFORMATION

• SDS Sheets for MPS4000 Bedding & Bonding Adhesive
• Products Catalog
•